Home>Products>Large Slewing Bearings>A12-125P1 Rotek Slewing Ring Bearings
A12-125P1 Rotek Slewing Ring Bearings
category
Large Slewing Bearings
Rotek A12-125P1 Bearing SPECIFICATIONS
What is China Rexroth a10vg Hydraulic Pump Supplier A12-125P1 Rotek Slewing Ring Bearings in mechanical engineering? Large Slewing Bearings Manufacturing Service . 12 mm t HMV96 Appropriate Hydraulic Nut Upload your CAD file for an instant.
- Rotek
A12-125P1
- 12 mm
- HMV96
- 6.5 mm
- 450.00 mm
- Tr480x5
- 95.00 mm
- 335.00 mm
- HM3196
- China Rexroth a10vg Hydraulic Pump Supplier2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
A12-125P1 Rotek Slewing Ring Bearings Code system
- 12 mm
- HMV96
- 6.5 mm
- 450.00 mm
- Tr480x5
- 95.00 mm
- 335.00 mm
- HM3196
- MS3196
- 620 mm
- 75 mm
- 135.00 Kg
- M8
Rotek A12-125P1 A12-125P1 Rotek Slewing Ring Bearings Description of the code
161.16.0400.891.21.1503 Standard 5 Slewing Ring Bearings | Fillet Radius/Chamfer:1 mm; Dynamic Load Rating:400,000 N; Configuration:Double Row; c:3 mm; Static Load Rating:750,000 N; Enclosure:Double Seal; f (max):3.1 mm; C1:65.1 mm; C:79 mm; D:180 mm; Limiting Speed - Oil:850 rpm; B:80 mm; d:120 mm; Weight:6.950 kg; Bore Type:Cylindrical Bore; E:196 mm; |
230.20.0400.503 Type 21/520. Standard 5 Slewing Ring Bearings | Groove Diameter:30.7 mm; Limiting Speed - Oil:26,000 rpm; Enclosure:Open; Radial Clearance:0.013 to 0.028 mm; d:20 mm; Limiting Speed - Grease:22,000 rpm; Dynamic Load Rating:4,000 N; D:32 mm; da (min):22 mm; ra (max):0.3 mm; Dx (min):35.5 mm; B:7 mm; Fillet Radius/Chamfer:0.3 mm; Factor fo:15.5; Groove Width:1 mm; Configuration:Single Row; Bore Type:Cylindrical Bore; Cy (max):1.8 mm; Da (max):30 mm; |
62.20.0560.001.21.1503 Standard 5 Slewing Ring Bearings | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:10300 lbf; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):33.8; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3250 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:22900 lbf; Ab - Cage-Cone Frontface Clearance:0.07 in; d:2 in; R - Cone Backface To Clear Radius3:0.2 in; Series:365; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:39900 lbf; |
232.21.0575.013 Type 21/650.2 Standard 5 Slewing Ring Bearings | R - Cone Backface To Clear Radius1:0.080 in; Cone Part Number:28990; d:2.4400 in; db - Cone Backface Backing Diameter:2.83 in; Cage Type:Stamped Steel; Da - Cup Frontface Backing Diameter:3.82 in; K - Factor7:1.37; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10800 lbf; D:3.9370 in; r - Cup Frontface To Clear Radius2:0.03 in; Cg - Geometry Factor11:0.103; Y2 - ISO Factor10:2.36; |
3R16-220N1 Rotek Slewing Ring Bearings | ra (max):3 mm; Groove Width A:26 mm; Limiting Speed - Oil:1,000 rpm; Axial Load Factor Y2:3.11; Weight:104.000 kg; Da (max):462 mm; Configuration:Double Row; B:160 mm; Enclosure:Open; Retainer Material:Machined Brass; Roller Profile:Symmetric; Bore Type:Cylindrical Bore; D:480 mm; Nr. of Holes:6; Limiting Speed - Grease:790 rpm; Radial Clearance:0.310 to 0.410 mm; Axial Load Factor Y0:2.04; d:320 mm; |
62.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | Inside Ring Width B:0 mm; Series:Industrial; Housing Width A:29.9 mm; Bolt Hole Spacing J:116.7 mm; Bearing Number:G1103KPPB3; Dynamic Load Rating:4850 lbf; Bearing Type:Ball Bearing; Inside Ring Outside Diameter:1.720 in; Static Load Rating:2530 lbf; Dimension E:1.988 in; Total Height L:79.4 mm; Bolt Hole Size N:11.5 mm; Flange Thickness A1:11.9 mm; Housing Style:Two-Bolt Flange; Weight:2.403 lb; |
230.20.0500.503 Type 21/650. Standard 5 Slewing Ring Bearings | Note:This product line wa; Bearing Type:Split Cylindrical Re; Bearing Number:LSE704BR; Series Type:Light Series; Cor - Static Load Rating:222676 lbf; Dimension H2:18.95 in; Housing Width:6.8 in; Maximum Speed:1070 rpm; Dimension J1 :27-13/16 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension L :32-3/4 in; Dimension H :9-1/2 in; Dimension K :5-1/4 in; Cr - Dynamic Load Rating:136576 lbf; |
S24-178E1 Rotek Slewing Ring Bearings | a - Effective Center Location3:16.8 mm; C - Cup Width:101.600 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:221000 lbf; G2 - Heat Generation Factor (Rib-Roller End):478.4; Y - ISO Factor9:1.47; e - ISO Factor8:0.41; Cup Part Number:327355; da - Cone Frontface Backing Diameter:606.04 mm; Design Units:Imperial; Cone Part Number:EE327220; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:154000 lbf; |
60.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | Note:This product line wa; Shaft Size:80 mm; Cor - Static Load Rating:51931 lbf; Housing Width:5.3 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H1:1.7 in; Bearing - Housing - Seal UPC:013992063052; Support Type:Two-Bolt Plummer Blo; Bearing UPC:013992030733; Bearing Type:Split Cylindrical Ex; Weight:64 lb; Bearing Number:LSM80BX; Series Type:Light Series; Seal Type:Kevlar Packing Seal; |
281.30.0975.013 Type 110/1100.1 Standard 5 Slewing Ring Bearings | T - Bearing Width across Cones:3.1874 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:76900 lbf; db - Cone Backface Backing Diameter:3.46 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:11400 lbf; Y2 - ISO Factor10:2.76; Cup Part Number:563D; D:5 in; Cone Part Number:567; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:19900 lbf; C - Double Cup Width:2.5625 in; |
61.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | C0r - Static Load Rating:0.52 kN; Grease Limiting Speed:46000 rpm; Outside Ring Width B:5.000 mm; Features:Non-Contact Seals; Oil Limiting Speed:54000 rpm; Outside Diameter D:15.000 mm; Cr - Dynamic Load Rating:1.3 kN; Weight:0.0040 Kg; Bore Size d:6 mm; Radius Rs min:0.200 mm; |
60.20.0944.500.01.1503 Standard 5 Slewing Ring Bearings | Axial Load Factor Y1:2.30; Roller Profile:Symmetric; d:170 mm; Weight:21.600 kg; Axial Load Factor Y0:2.25; Limiting Speed - Oil:2,300 rpm; Constant e:0.29; Da (max):268 mm; Radial Clearance:0.140 to 0.200 mm; Limiting Speed - Grease:1,800 rpm; Center Guidance:Floating Steel Ring; Configuration:Double Row; Axial Load Factor Y2:3.43; Nr. of Holes:6; Groove Width A:16 mm; Enclosure:Open; da (min):182 mm; |
231.21.0575.013 Type 21/650.1 Standard 5 Slewing Ring Bearings | Design Units:Imperial; C0 - Static Radial Rating:5720 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:1560 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:952 lbf; G1 - Heat Generation Factor (Roller-Raceway):5.8; C1 - Dynamic Radial Rating (1 million revolutions)6:6010 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:2710 lbf; d:0.6875 in; db - Cone Backface Backing Diameter:0.91 in; |
61.20.0560.101.21.1503 Standard 5 Slewing Ring Bearings | Dimension C:2.81 in; Dimension G:2.440 in; C0 - Static Load:26600 lb; Dimension D Max:7.13 in; Bearing Number:22210; Shaft Tolerance:0.0015 in; Housing Style:Two-Bolt Pillow Bloc; Grease Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Y1 - Geometry Factor:2.84; Oil Lubrication - M/N Seal:2400 rpm; Y2 - Geometry Factor:4.23; Full Timken Part Number:QMP10J200SB; Dimension S:2.87 in; |
61.20.0944.500.01.1503 Standard 5 Slewing Ring Bearings | Oil Holes in Retainer:No; D - Bearing O.D.:2.1875 in; Bearing Type:Thrust Tapered Rolle; R - Fillet Radius Shaft (Max):0.03 in; B:0.6250 in; Steering Pivot Rating:4500 lbf; Weight:0.3 lb; d - Bore Diameter:1.1975 in; |
A16-152E2 Rotek Slewing Ring Bearings | Dimension H1:2.0 in; Series Type:Medium Series; Dimension H2:25.6 in; Dimension H:12.756 in; Dimension J:21.7 in; Weight:878 lb; Pillow/Plummer Block Style:Split Cylindrical Ho; Housing Width:9.5 in; Dimension M:11.0 in; Note:This product line wa; Support Type:Four-Bolt Plummer Bl; Bolt Size:4 x M30; Cr - Dynamic Load Rating:255833 lbf; Seal Type:Felt Type; Bearing UPC:013992033239; Shaft Size:9 in; |
No. | Brand | J | a | e | N | C | c | B | H |
161.20.0560.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
161.20.0710.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
162.20.0710.891.21.1503 | Standard 5 | - | - | 9.0 mm | - | - | - | - | - |
62.25.0855.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
61.25.0980.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
161.16.0450.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
162.16.0400.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
162.16.0450.891.21.1503 | Standard 5 | - | - | - | - | - | - | 36 mm | - |
61.20.0544.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
232.20.1000.503 Type 21/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |
62.20.0710.000.11.1503 | Standard 5 | - | - | - | - | - | - | 0.4300 in | - |
3R16-265E1 | Rotek | - | - | - | - | - | - | - | - |
162.25.0886.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
231.20.0900.013 Type 21/1050.1 | Standard 5 | - | - | - | - | - | - | - | - |
60.20.0744.575.01.1403 | Standard 5 | - | - | - | - | - | - | 26 mm | - |
230.20.1000.013 Type 21/1200. | Standard 5 | - | - | - | - | - | - | - | - |
11.20.0755.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
60.20.1094.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
161.20.0630.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
62.25.0955.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
62.25.1180.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
281.30.0900.013 Type 110/1100.1 | Standard 5 | - | - | - | - | - | - | - | - |
62.25.0886.109.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
161.16.0400.891.21.1503 | Standard 5 | - | - | - | - | 79 mm | 3 mm | 80 mm | - |
61.25.1120.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
3R10-125P1B | Rotek | - | - | - | - | - | - | - | - |
230.21.0875.013 Type 21/950. | Standard 5 | - | - | - | - | - | - | - | - |
232.20.0900.013 Type 21/1050.2 | Standard 5 | - | - | - | - | - | - | - | - |
3R16-220N1 | Rotek | - | - | - | - | - | - | 160 mm | - |
A12-125P1 Rotek Slewing Ring Bearings Video
Rotek A12-125P1 INTERCHANGE
Large Slewing Bearings Part series A12-125P1 is a potential replacement for these common bearing part numbers:
A12-125P1
A12-125P1
A12-125P1
A12-125P1
A12-125P1
A12-125P1
A12-125P1
A12-125P1
Contact Us
- China Rexroth a10vg Hydraulic Pump Supplier
- Address502 Courtneypark Drive West, Mississauga,Ontario, L7W 1Y6, Canada
- Phone(Working Time)+1-905-987-2700
- Fax
Rotek A12-125P1 Technical Articles
How much does a hydraulic pump cost? |
Why is hydraulics more efficient than electricity? |
Large Slewing Bearings CATEGORIES
- Rexroth A10vg Hydraulic Pump
- Rexroth A4vsg Hydraulic Pump
- Rexroth A2fo Hydraulic Pump
- Rexroth A11vo190 Hydraulic Pump
- Rexroth A4vg180 Hydraulic Pump
- Rexroth A4vg125 Hydraulic Pump
- Rexroth A10vo100 Hydraulic Pump
- Rexroth A4vg250 Hydraulic Pump
- Rexroth A11vo Hydraulic Pump
- Yuken Pvr50 Hydraulic Pump
- Yuken Pv2r12 Hydraulic Pump
- Yuken Pvr 150 Hydraulic Pump
- Yuken Dsg 03 Hydraulic Pump
- Yuken Pv2r2 Hydraulic Pump
- Yuken Dsg 01 Hydraulic Pump
- Yuken Ar 16 Hydraulic Pump
- Yuken Pv2r Hydraulic Pump
- Yuken A37 Hydraulic Pump
- Vickers Pvb15 Hydraulic Pumps
- Vickers Pvb29 Hydraulic Pumps
- Vickers Pvh98 Hydraulic Pumps
- Vickers 2520vq Hydraulic Pumps
- Vickers Ta1919 Hydraulic Pumps
- Vickers Pve21 Hydraulic Pumps
- Eaton 72400 Hydraulic Pumps
- Eaton 300aa00082a Hydraulic Pumps
- Vickers V10 Hydraulic Pumps
- Parker Pv140 Hydraulic Pump
- Parker Pgp315 Hydraulic Pump
- Parker B22 Hydraulic Pump
- Parker F1 Piston Pump For Sale
- Parker Pv080 Hydraulic Pump
- Parker Pvp33 Hydraulic Pump
- Parker P3 Hydraulic Pump
- Parker Pgp350 Hydraulic Pump
- Parker Pgp505 Hydraulic Pump
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Tapered Roller Bearing Assembly
- Thrust Ball Bearing
- Spherical Roller Bearings
- Angular Contact Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings